.jpeg)
All the fishermen from predator who tried this manipulation remember it. Paste from accessories on your boat from fishing is always a stressful time. There's no room for error when it comes to positioning the accessories that the glue to use.
We will first see that all theFloat tube Seven Bass cannot receive motor support kit. We'll look at which models are affected, and which ones you'll need to keep in mind flippers.
We will then talk about glue which you can use to carry out this operation. This product is essential for support like all the others accessories, but also with respect for the materials from which your product is made Float tube.
Finally, we'll look at the technical side of the installation. We'll talk about the choice of engine with its power and of course bonding from pads and drying time.
Which model of Float tube is compatible ?
.jpeg)
At Seven bass, there are two main families of float tube from fishing that can support the installation of this type of motor support. It is the type of fabric used in the construction of these products that must be compatible with the use of a glue to hold it all together.
The first series, which includes the seven bass products named Hybrid line. They have the particularity of having a pvc canvas that makes them up, a bit like a inflatable boat. This will allow for easy adhesion and an installation that will last over time without the need for rework.
A , or even will be the most popular for accessories and various other options. You'll have a range of price wide enough to be able to make your choice. Please note, however, the maximum recommended load on these products, added accessories particularly heavy, such as battery essential to running a electric motor.
Models concerned :
- (Motor support kit already understood)
The second family of Float tube Seven Bass that can accommodate this type of support for electric motor, is the series dropstitch. Composed of models such as the Seven bass flatform or the Seven bass jungle operator, these products for the predator fishing are particularly heavy and almost require the use of a engine. The flippers or the oars are generally not sufficient to enable you to carry out your projects successfully abuses and your travel.
Models concerned :
- (Motor support kit already included)
The latter models will generally be ready equipped with a support as accessories. Don't hesitate to take a few photos and measurements to facilitate a new installation in the future.
For smaller budgets, there are supports capable of settling on models à seven bass room. Even if the retail price is attractive, the various reviews we have received do not recommend the use of this type accessories which can quickly turn out to be dangerous during the game fishing. We really recommend using at least a pvc model while respecting the maximum load eligible.
Which glue should I use for installation ?
This can be a tricky question. The key is to choose your product to ensure that the continued installation of the engine kit is perfect without putting your fabric at risk boat. La fishing from predator is risky enough for a inflatable boat.
To do this, you have two options. The support for sale can be sold with a suitable adhesive installation. It's easy and you don't have to ask yourself many questions. So you won't need to spend any more than you did when you bought your kit.
However, we recommend that you check on delivery that the glue were not created too long ago. It's not unusual to find yourself with a dried adhesive which has lost some of its properties to paste your accessories.
You can also opt for a glue which can usually be found on the shelves of DIY shops. But in our opinion, it's the best option for a perfect fit on tubes of your inflatable boat. At the same time, you can be sure of a relatively recent product with its qualities intact.
You can also enjoy tubes from Seven bass sold separately with very positive reviews for quality.
What technique should be used to make the collage ?
Generally, you will have four pads to stick on your float tube from seven bass fish to help you install your electric motor kit. The procedure is fairly straightforward, but requires precision and meticulousness to ensure that installation before each outing is not complicated.
Firstly, you will need to waffle all your waffles boat. The objective is to achieve the same pressure as you would to go on water. On the other hand, you need to assemble your pack as it was already installed on your float.
At this stage, you will have theinflated boat and on the other the support. The plate should then be positioned so that it is perfectly vertical.
This is the sine qua non condition for your electric motor can function in the best possible way.
Once this positioning has been carried out, you need to choose the location for the engine. Most practitioners will choose to put the support at the rear. But depending on the length, it may sometimes be easier to position it sideways.
We invite you to do some tests to find out if your arm is not continually in an extended position, which can quickly become unpleasant. The position of the canes, of the landing netOr the use or non-use of flippers will be able to play its part in this reflection.
Once the product is in the ideal position for you, you will need to draw a circle around the pads to mark their position. We recommend you do this with a felt-tip pen for easy marking that can be quickly erased afterwards.
The whole thing will then have to be deflated. The support position itself flat to carry out the phase of the bonding. Make sure you inspect the direction in which everything is to be installed glued. All you have to do is apply the glue, often on both sides, and respect the pause times to ensure optimum bonding.
After that, you'll usually have to wait two or three days before you can finally position the metal part and be satisfied with a perfectly finished job.
You may also like :