Float tube storage and maintenance: Complete guide

float-tube

Your float tube requires constant attention to ensure that it lasts over time in the same way that a boat. He is responsible for security from sinner once on the water. It is therefore essential not to neglect it once the fishing to the fly or to pike is complete.

We will first see that the storage can be of great importance to every sinner. The folding of either the structure of the float tube, and rooms or the headquarters should be carried out in a fairly methodical manner to avoid premature marking or damage to your boat.

The method of transport can also have an impact on the equipment. Each sinner should remember to take out all the accessories Pike N Bass, Savage Gear or Dam on the float tube but also lures and hooks from your game of fishing. You should opt for a bag to maintain the quality of your product product.

Finally, we will see that a float tube can also benefit from an interview in the same way as you would with reels or a boat. You'll need to think about cleaning all the parts, checking and cleaning the valves to maintain pressure, and checking and repairing the various components accessories.

The importance of tidying up

It may seem like an insignificant notion, but the organisation of the storage of your boat can be essential to its lifespan, as in the case of a boat. From Seven bass or jmc inner tubes, to seven bass Armada or seven bass Cobra pvc structures, the accessories Pike n Bass or anything to do with electric motors, these are all points that need to be brought into line with each other.

The structure itself can be stored in different ways. But if you have the space, the best thing to do is to leave your float tube slightly swollen. This ensures that it is not folded in on itself and avoids being marked or having points that become brittle. This is especially true for pVC models.Inflating your boat is not something to be neglected - our article How do I inflate a float tube ?, it will provide you with the best practices to put in place today.For models with chambers from seven bass or Savage Gear for example, we recommend that you deflate completely. It's best to store them flat, if you can. You don't need to take any special care with the fabric.

In all cases, for a ideal storage, we recommend that you dry your products before you put them away, just as you would your clothes, your clothes, your line or your reels. This will prevent the growth of mould, which could attack the fabric of your model float tube. You will do the same with your lures and with your fishing rod holders, your pockets or your flippers.

For the electrical part, you need to be particularly methodical and organised. You'll have to opt for the installation of products in their bag and remember to dry the connectors thoroughly. We don't advise you to leave them in an unheated garage, but rather to store them in your home. That way, any water residue should dry out quickly.

For the batteries of your engines and sounders, you'll also need to keep them in a dry place. Remember to recharge them when you get home. A little tip on this subject: don't store your batteries on the floor. They discharge very quickly, making them difficult to use and damaging.

Transport, a sensitive time

Before arriving at the waterfront, it is necessary to transport your entire equipment and accessories. This is usually done with your car or, if you're lucky, with a utility vehicle for fishermen. You'll need to combine the boat, the rod holder, the reels, the boxes filled with lures or your engine and its battery.

It's important to think about the position of each piece of equipment. The slightest bend in the road or the slightest brake application could prevent you from benefiting from the security you need for your investments, and that's just before you set off fishing.

We advise you to think carefully about storing all products that have hooks. The fact that everything in your car can move during the journey inevitably entails risks for the solidity of the structure of your car float tube. It would be a shame not to be able to enjoy a few hours of fishing for the sake of storage or a puncture on one of the flanges of your float tubes.

Remember to put the inflatable in a bag apart. There are some at jmc or seven bass that will do the job very well. It will bring together both the inflatable seat, the file, and of course your float tubes. Without taking any risks, you can add the pump and flippers.

The part accessory has less regular shapes and is sometimes a little sharp or pointed. We recommend storing them in a bag or in transport crates if you have them. Our products 7 accessories for your Float Tube, if you're looking to buy the essential equipment for this kind of activity, you might be interested in this range. This ensures no displacement when there are speed differences in the car and the fact that they clash or move.

For the engine, if you want to keep the axle straight, you will of course need to secure it very well and protect the ends if necessary. Remember never to force the shaft, as it could bend. This would prevent the motor from operating correctly in the long term. For the battery, this generally represents a lot of weight. You'll need to separate this material from everything else to avoid breaking a single piece support or even fishing rods in a wrong turn.

Regular maintenance

For fishing there are a few things you need to do to ensure your peace of mind float tubes. This will guarantee you a certain level of security, but also a product that will last longer over time.

In our opinion, the first point will be cleaning of your product. Indeed, even with regular attention, the fishermen cannot completely or perfectly dry their float tubes. Traces of water will then remain, which can have consequences. You can imagine the hull of a boat for example. You can also clean pockets, the pump, the flippers, your fishing rod holders or your lifejacket.

You'll need to clean the valves and check that they're working properly. They are the ones that maintain the pressure on board, so there's no question of taking risks with them fishing. Their operation must not show a single sign of weakness.

When you've reached this stage, remember to unscrew the valves completely and hang up your float, with the valves facing downwards. This will allow you to empty the water which may have accumulated in the bladders during inflation.

You might like :